Maybe my version of this fix will last less, but it's easy to do it whenever the drift returns and it'll save you the battle against putting the analog back together. But it turns out there’s a lot more to this story. For Victorstk, this fix worked flawlessly, turning a badly drifting Joy-Con into one that worked like new.
FIX JOY CON DRIFT FULL
A piece of cardboard as thin as one millimeter puts enough pressure on the joystick sensor to restore full contact and stop drift.
FIX JOY CON DRIFT SOFTWARE
On the other hand, flooding and draining the analog with alcohol might leave some of the dirt still inside, just in a different area where it doesn't affect functionality. YouTuber VK’s Channel seems to indicate that a drifting Joy-Con can be healed simply by applying pressure to the casevia external squeeze or an internal spacer. Nintendo Joycon Drift Fix (Not Software Related) Step 1: Opening the Joycon Step 2: Removing Ribbon Cables to Access the Analog Stick Step 3: Now the Fun. Of course, this soon prove to be problematic for Switch players, with some forced to replace their Joy-Cons in order to fix the problem. My conclusion is: While taking the whole analog stick apart is cleaner, it also represents a high risk of breaking or deforming the metal clips, and it's quite hard to do. Joy-Con drift occurs when the controllers register input when there is none, which means that the players character or cursor could move in a direction for no reason whatsoever. Their terrible drift now seems to be gone. Finally I let them dry for half an hour while moving them all around every couple of minutes.Īfter reassembly, all four joycons have been working like new. Then I dried them with a rag, and carefully blew into a corner to push out the alcohol excess. iFixit has the parts needed too Follow this Guide However, as rainbopython notes, cleaning the contact pads is just a temporary fix, as the pads wear down over time, which is likely the culprit for the drifting problem. I used a spray bottle and didn't stop until they leaked abundantly from one of the corners. This repair fixes the notorious 'Joy-Con drift' issue.
My experiment was: I followed the procedure here for one of them, and for the other three I just took out the analog sticks and flooded them with alcohol through the gap between the moving parts. UPDATE!: I was doing this at work (slow day) and friends saw me, so I offered to fix their joycons too for the sake of science.
0 kommentar(er)
